SIIG POS 2000 User Manual download pdf (Page 8)

To Verify Windows Vista Installation

1. Right click Computer, click Manage, click Continue,

then click Device Manager.

2. Click on the + (plus sign) in front of Ports (COM &

LPT), CyberSerial 16Cxxx... should be displayed

two times.

3. Double click Multifunction adapters, SIIG

CyberPro 2S PCI board should be displayed.

Changing COM Port Address

Some serial devices need a specific COM port in order to

work. If your serial device works properly, do not

change this setting.

Windows 95/98/98SE/ME

1. From the Device Manager window double click

Ports (COM & LPT), double click the CyberSerial

PCI serial port you want to change.

2. Click Settings tab, click the down arrow next to Port

Name box and select a COM port that is not in use.

Click OK.

3. Click OK, then close Device Manager.

Windows 2000/XP/Server 2003/Vista

1. From the Device Manager window double click

Ports (COM & LPT), then double click the

CyberSerial PCI serial port you want to change.

2. Click Settings tab and click Advanced.

3. Click the down arrow next to the COM Port number

box and select a COM port that is not in use. Click

OK.

4. Click OK, then close Device Manager.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

SIIG POS 2000 User Manual Page 8