SIIG JJ-E20011-S1 Installation Guide

1CyberSerial Dual PCIeQuick Installation Guide04-0611AIntroducing the CyberSerial Dual PCIeThe CyberSerial Dual PCIe high-speed serial I/O cardprov

10Blank Page

11Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers! Simply visit ourweb site at www.siig.com and click Support. Our onlin

CyberSerial Dual PCIe is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks ofSIIG, Inc. Microsoft and Windows are register

2LayoutFigure 1: Layout* Note: If the serial port requires power output,connect the system power source to board's powerconnector. However, mos

3Mini 2-port fan-out cableBoard connector9-pinserialFigure 2: Mini 2-port fan-out cableHardware InstallationGeneral instructions for installing the ca

44. Set J1 and J2 jumper settings to the desired voltageonly if your serial device needs additional powerfrom the serial port. However, most serial d

56. Under Other Devices, starting at the top, right click16C95X Serial Port, then click Update DriverSoftware.7. Click Browse my computer for driver s

63. Insert the driver CD, check Include this location inthe search, uncheck the other box.Note: Click Cancel at the CD AutoPlay box ifprompted.For 32-

7Windows 20001. At the Found New Hardware Wizard, click Next.2. Select Search for a suitable driver for my device(recommended), and click Next.3. Chec

8Changing COM Port NumberSome serial devices need a specific COM port in order towork. If your serial device works properly, do notchange this settin

9Blank Page