SIIG POS 2000 User Manual

1Low Profile PCI-2SQuick Installation Guide04-0367BIntroducing the Low Profile PCI-2SThe Low Profile PCI-2S high-speed serial card providestwo additio

10Blank Page

11Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers! Simply visit ourweb site at www.siig.com and click Support. Our onlin

Low Profile PCI 2S is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG,Inc. Microsoft, Windows and Windows Vista a

2LayoutFigure 1. LayoutJumper Settings (JP1, JP2)Open = 0 volts (default)Short 1-2 = 5V @ pin 9Short 2-3 = 12V @ pin 9Note: Most serial devices do n

3Hardware InstallationGeneral instructions for installing the card are providedbelow. Since the design of computer cases andmotherboards vary, refer

48. Remove the slot bracket from an available PCI slot,then secure the Serial port cable with the slot bracketholding screw. Skip this step if the se

5Windows ME1. At the Add New Hardware Wizard, choose Specifythe location of the driver (Advanced), then clickNext.2. Insert the driver CD, check Speci

6To Verify Windows NT 4.0 Installation1. Click Start, Settings, Control Panel, double clickPorts icon.2. Two new COM ports will be assigned.Windows 2

7Windows XP/Server 2003 (64-bit)1. At the Found New Hardware Wizard, insert thedriver CD.For XP w/SP1 or earlier/ Server 2003: go to step #2.For XP w/

8To Verify Windows Vista Installation1. Right click Computer, click Manage, click Continue,then click Device Manager.2. Click on the + (plus sign) in

9Blank Page