SIIG CyberSerial ExpressCard Installation Guide download pdf (Page 2)

Layout

Figure 1: CyberSerial ExpressCard

ExpressCard

Connector

Serial port

Hardware Installation

General instructions for installing the CyberSerial

ExpressCard are provided below. Since the design of

notebook computers vary, refer to your system’s reference

manual for further information, if needed.

1. Insert the CyberSerial ExpressCard into the

ExpressCard slot of the computer with it's Express

Card Connector facing the slot. Push the card into

the slot gently, yet firmly for a solid connection.

Note: Some ExpressCard slots will click when the

ExpressCard is fully inserted into the slot.

2. If your system was powered off when you plugged

in the ExpressCard, turn it on and go to Driver

Installation on page 3. Otherwise, go directly to

Driver Installation on page 3.

1 2 3 4 5 6 7 8

No comments

SIIG CyberSerial ExpressCard Installation Guide Page 2