SIIG 1-Port ECP User Manual

104-0721ADP 1-Port ECP/EPPParallel PCIQuick Installation GuideIntroductionThe DP 1-Port ECP/EPP Parallel PCI is a high-speed parallel card that provid

10Changing Parallel Port NumberSome parallel port devices need a specific LPT inorder to function properly. If your parallel portdevice works, do not

113. Click Next, then Finish.4. Click Yes to restart Windows to completethe installation.Windows 98 / 98SE1. At the Add New Hardware Wizard, clickNext

122. Insert the driver CD, and click OtherLocations.3. Type in D:\9x, click OK, then Finish.(Change D: to match your CD-ROM driveletter)4. From the In

13 Blank Page

14 Blank Page

15Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers! Simply visit our web site atwww.siig.com and click Support. Our onli

PRODUCT NAMEDP 1-Port ECP/EPP Parallel PCIFCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS BOPERATING ENVIRONMENT: FOR HOME OR OFFICE USEFCC COMPLI

2System Requirements• Pentium® or equivalent computer with anavailable PCI or PCI-X slot• Windows® 7 (32-/64-bit) / Vista (32-/64-bit) / XP (32-/64-bi

3Hardware InstallationGeneral instructions for installing the card areprovided below. Since the design of computercases and motherboards vary, refer

44. To install the card, carefully align the card'sbus connector with the selected PCI slot onthe motherboard. Push the board downfirmly, but gen

54. Click Browse my computer for driversoftware.5.For 32-bit: Type in D:\32-bit, then clickNext. (Change D: to match your CD/DVD-ROM drive letter)Fo

65. For 32-bit: Type in D:\32-bit, then clickNext. (Change D: to match your CD/DVD-ROM drive letter)For 64-bit: Type in D:\64-bit, then clickNext. (

7For 64-bit: Type in D:\64-bit, then clickNext. (Change D: to match your CD/DVD-ROM drive letter)5. Click Finish to complete the installation.Windows

8Windows Server 2008 R21. Install the board and boot up Windows.2. Right click Computer, click Manage, doubleDiagnostics, then click Device Manager.3.

94. Insert the driver CD, type in D:\2000, thenclick OK. (Change D: to match your CD/DVD-ROM drive letter)5. Click Next, then click Finish to complete