SIIG Cyber 2S1P PCI Installation Guide

1Cyber 2S1P PCIQuick Installation Guide04-0345CIntroducing the Cyber 2S1P PCIThe Cyber 2S1P PCI high-speed serial I/O card providestwo 9-pin serial po

10Changing Parallel Port Address (LPT)Some parallel devices need a specific parallel port inorder to work. If your parallel device works properly, do

11Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers! Simply visit ourweb site at www.siig.com and click Support. Our onlin

Cyber 2S1P PCI is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG,Inc. Microsoft, Windows and Windows Vista are r

2Package Contents• Cyber 2S1P PCI board• Connector bracket w/9-pin serial port• Driver CD• Quick Installation GuideLayoutFigure 1. LayoutJumper Setti

3Serial Port 2 ConnectionFigure 2. Connecting the ribbon cableHardware InstallationGeneral instructions for installing the card are providedbelow. Si

45. Set JP1-JP2 jumper settings to the desired voltageonly if your serial device(s) needs additional powerfrom the serial port. However, most serial

5Windows 98/98SE1. At the Add New Hardware Wizard, click Next.2. Select Search for the best driver for your device(Recommended), then click Next.3. In

6Windows NT 4.01. From the desktop click Start, then Run.2. Insert the driver CD, type inD:\NT4\Install_Serial.exe, then click OK. (ChangeD: to match

74. Insert the driver CD, type in D:\2000, then click OK.(Change D: to match your CD-ROM drive letter)5. Click Next and Finish.6. Repeat steps 1-5 two

8To Verify Windows 2000/XP/Server 2003Installation1. Right click My Computer, click Manage, then selectDevice Manager.2. Double click Ports (COM &

9Changing COM Port AddressSome serial devices need a specific COM port in order towork. If your serial device works properly, do notchange this setti