SIIG USB Over IP Installation Guide download pdf (Page 2)

Layout

Figure 1: USB Over IP 1-Port Layout

Hardware Installation

Make sure that your USB devices are powered off and

that the USB Over IP 1-Port's power adapter is

disconnected.

1. Connect the USB Over IP 1-Port to a router or switch

on your Ethernet network.

2. Connect your USB device to the USB Over IP 1-Port.

3. Connect the power adapter to the USB Over IP

1-Port. When the Network LED indicator lights up,

the server is properly connected to the network.

Driver Installation

Please make sure the USB Over IP 1-Port is connected to

your network before proceeding with driver installation.

1. Insert the driver CD. The installation will start

automatically. If not, double click Launch.exe from

the driver CD root directory.

2. Click Install and follow the on screen instructions to

complete the installation.

USB Port

Power Adapter Jack

Reset Button

Network Port

Power LED

Network LED

1 2 3 4 5 6 7 ... 11 12

No comments

SIIG USB Over IP Installation Guide Page 2