SIIG DP eSATA 6Gb/s 2-Port PCIe User Manual download pdf (Page 9)

9

6. Press F10 to exit the BIOS. When asked Do

you want to exit from Marvell BIOS Setup?

press Y to exit and reboot.

RAID 1 (Mirror)

Two drives are needed to make a Mirror.

1. As the BIOS boots, press Ctrl+M when

prompted to enter the RAID BIOS.

2. At the next screen select HBA 0: Marvell 0,

press Enter. Select Configuration Wizard,

then press Enter.

3. Use Up or Down arrow key to choose a

hard drive. Press Spacebar to select the

hard drive. Perform the same procedure

with the other hard drive. Once both hard

drives are selected press Enter.

4. Select RAID Level or HyperDuo, press

Enter. Select RAID1, then press Enter.

Note: You can rename the VD Name. This

is optional.

5. Select Next, press Enter. When asked Do

you want to create this virtual disk? press

Y to select Yes.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 23 24

Comments to this Manuals

No comments