SIIG DP eSATA 6Gb/s 2-Port PCIe User Manual download pdf (Page 10)

10

6. Press F10 to exit the BIOS. When asked Do

you want to exit from Marvell BIOS Setup?

press Y to exit and reboot.

RAID 10 (Mirror+Striping)

Four drives are needed to make a RAID10.

1. As the BIOS boots, press Ctrl+M when

prompted to enter the RAID BIOS.

2. At the next screen select HBA 0: Marvell 0,

press Enter. Select Configuration Wizard,

then press Enter.

3. Use Up or Down arrow key to choose hard

drive. Press Spacebar to select the hard

drive. Perform the same procedure with

the other hard drives. Once all hard drives

are selected press Enter.

4. Select RAID Level or HyperDuo, press

Enter. Select RAID10, then press Enter.

Note: You can rename the VD Name. This

is optional.

5. Select Next, press Enter. When asked Do

you want to create this virtual disk? press

Y to select Yes.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comments to this Manuals

No comments