SIIG DP eSATA 6Gb/s 2-Port PCIe User Manual download pdf (Page 4)

5. To install the card, carefully align the card's

bus connector with the selected PCI Express

slot on the motherboard. Push the board

down firmly, but gently, until it is well

seated.

6. Replace the slot bracket holding screw to

secure the card.

Device Connection

The DP eSATA 6Gb/s 2-Port PCIe i/e supports one

internal and one external Serial ATA hard disk

drive.

Internal Serial ATA port

1. Install your hard disk drive(s) in the chassis.

2. Connect the Serial ATA hard disk drive to

the system power supply.

Note: For hard drives with both SATA

power connector and legacy 5-pin

connector, use either the SATA power

connector or the legacy 5-pin power

connector. Using both power connectors

may damage the hard drive.

1 2 3 4 5 6 7 8 9 ... 19 20

No comments

SIIG DP eSATA 6Gb/s 2-Port PCIe User Manual Page 4