SIIG DP eSATA 6Gb/s 2-Port PCIe User Manual download pdf (Page 12)

12

Server 2003 (32-bit)

For A New Installation

A new installation requires a floppy disk for the

driver installation. To make this floppy disk,

copy the contents of the 32bit folder, found on

the driver CD, onto a blank floppy disk then

follow the directions below.

1. Install the board and follow Microsoft

procedures to install Windows accordingly.

2. At the Windows Setup screen, press F6 to

install the RAID driver.

3. When prompted, press S to specify the

location of the driver.

4. Insert the floppy disk, then press Enter.

5. Select Asmedia 106x SATA Controller

32bit, then press Enter.

Note: Do not remove the floppy diskette

from the floppy drive. You need to install

the driver once again during the

installation.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments