SIIG Low Profile PCI-2S Installation Guide

1CyberSerial Dual PCIQuick Installation Guide04-0376BIntroducing the CyberSerial Dual PCIThe CyberSerial Dual PCI high-speed serial I/O cardprovides

10Changing COM Port AddressSome serial devices need a specific COM port in order towork. If your serial device works properly, do notchange this sett

11Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers! Simply visit ourweb site at www.siig.com and click Support. Our onlin

CyberSerial Dual PCI is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks ofSIIG, Inc. Microsoft, Windows and Windows Vista

2Package Contents• CyberSerial Dual PCI board• 2-port fan-out cable• Low profile bracket (Dual Profile board only)• Driver CD• Quick installation guid

3Fan-out CableFigure 2. Fan-out cableHardware InstallationGeneral instructions for installing the card are providedbelow. Since the design of comput

45. Place JP1 and JP2 jumper settings to the desiredvoltage only if your serial device needs additionalpower from the serial port. However, most ser

5Windows 951. At the Update Device Driver Wizard, click Next.2. Insert the driver CD, click Other Locations.3. Type in D:\9x, click OK, then click Fin

64. Repeat steps 1 and 2.5. Click Next, Next, then Finish.6. Restart Windows to complete the installation.To Verify Windows 95/98/98SE/ME Installation

7Windows 20001. At the Found New Hardware Wizard, click Next.2. Select Search for a suitable driver for my device(recommended), then click Next.3. Che

83. Select Install the software automatically(Recommended, then click Next.4. Click Continue Anyway, then click Finish.5. Repeat steps 1-3 three more

9Linux Kernel 2.4.x or later1. Open the terminal.2. Type setserial -bg /dev/ttyS* and hit Enter to showthe current serial ports installed. SIIG board