SIIG UltraATA 100 Pro Installation Guide

1UltraATA 100 PCIQuick Installation Guide04-0196CIntroducing the UltraATA 100 PCIThe UltraATA 100 PCI is an ultra high-speed dualchannel UltraATA 100

10To Verify Windows NT 4.0 Installation1. Click Start, Settings, Control Panel. Doubleclick SCSI Adapters.2. Highlight CMD PCI 646U2/648/649 Ultra DM

116. Select Search for a suitable driver for my device(recommended), and click Next.7. Insert the Software Installation diskette into thefloppy drive,

126. Click Finish and restart Windows to completedriver installation.Windows XP/Server 2003 InstallationWindows XP and Server 2003 has built-in drive

Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers!Simply visit our website at www.siig.com and click on Support.Our online s

About SIIG, Inc.Founded in 1985, SIIG, Inc. is a leading computer upgrademanufacturer of I/O connectivity products, including PCI & ISAserial and

2System Requirements• Pentium-class computer with one available PCIslot• Windows 95B/98/98SE/NT 4.0/2000/XP/Server 2003Package Contents• UltraATA 100

3Hardware InstallationGeneral instructions for installing the card are providedbelow. Since the design of computer cases andmotherboards vary, refer

41. Install hard disk drive(s) in chassis.2. Attach one connector on the long end of the UltraATA ribbon cable to the board's IDE connector andth

5Driver InstallationThis section provides information on how to install theUltraATA 100 PCI drivers for the following operatingsystems:Windows 95B ...

67. From the Insert Disk window, select OK, thenretype the path A:\Win9x and click OK.8. Remove the Software Installation diskette andselect Yes to re

76. Select Search for the best driver for your deviceoption and click Next.7. Check Specify a location and type in a:\Win9xand click Next. Click Next

86. Click Finish, remove the driver diskette and restartWindows to complete the driver installation.For Existing Windows ME Installation1. Install the

93. Screen 2, Windows NT Setup, Setup is loadingfiles, keep pressing F6 key to add the UltraATA100 NT4.0 driver.4. If screen 3 does not appear for opt