SIIG UltraATA 133 PCI Installation Guide download pdf (Page 6)

5. Click Next, Next, and then Finish respectively.

6. Remove the Driver diskette and restart Windows to complete

driver installation.

Windows ME Driver Installation

For New Windows ME Systems

1. Follow Microsoft procedures to install Windows ME

accordingly.

2. Once Windows has been installed, right-click My Computer,

then click Properties. Click Device Manager tab.

3. Double click Other Devices then PCI SCSI Bus Controller.

4. Click Driver tab, then Update Driver.

5. Insert the Driver diskette, check Specify the location of the

driver (advanced) and click Next.

6. Select Search for the better driver option, check Specify a

location, uncheck Removable Media, type in A:\WinMe, and

click Next.

7. Click Next and Finish.

8. Remove the Driver diskette and click Yes to restart Windows

to complete driver installation.

For Existing Windows ME Systems

1. Boot up Windows ME.

2. At the Add New Hardware Wizard, check Specify the

location of the device (advanced), and click Next.

3. Insert the Driver diskette, check Specify a location, uncheck

the other boxes, type in A:\WinMe, and click Next.

4. Click Next and Finish.

5. Remove the Driver diskette and restart Windows to complete

driver installation.

Verify Proper Installation for Windows 98/98SE/ME

1. Right-click My Computer, then click Properties. Click Device

Manager tab.

2. Double click Hard Disk Controllers, an entry, SIIG CN2487

UDMA133 IDE Controller should be listed.

1 2 3 4 5 6 7 8 9 10 11 12

No comments

SIIG UltraATA 133 PCI Installation Guide Page 6