SIIG 04-0341D User Manual

1CyberPro PCI 2SQuick Installation Guide04-0341DIntroducing the CyberPro PCI 2SThe CyberPro PCI 2S high-speed serial I/O card providestwo additional 9

10Changing COM Port AddressSome serial devices need a specific COM port in order towork. If your serial device works properly, do notchange this sett

11Technical Support and WarrantyQUESTIONS? SIIG’s Online Support has answers! Simply visit ourweb site at www.siig.com and click Support. Our onlin

CyberPro PCI 2S is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered trademarks of SIIG,Inc. Microsoft, Windows and Windows Vista are

2Package Contents• CyberPro PCI 2S board• Driver CD• Quick installation guideLayoutFigure 1. LayoutJumper Settings (JP1, JP2)Open = 0 volts (default)

3Hardware InstallationGeneral instructions for installing the card are providedbelow. Since the design of computer cases andmotherboards vary, refer

4Driver InstallationThis section provides information on how to install theCyberPro PCI 2S drivers.Windows 7 (32-/64-bit)1. Right click Computer, clic

53. Repeat step 2 to complete the driver installation.Note: Windows Vista driver installation processmay take several minutes to complete.Windows XP (

6To Verify Windows 7 / Vista / XP / Server 2003 &2008 Installation1. Check in Device Manager to verify installation.For Windows 7: Right click Com

7To Verify Windows 2000 Installation1. Right click My Computer, click Manage, then clickDevice Manager.2. Click on the + (plus sign) in front of Ports

85. Repeat steps 1-4.6. Restart Windows to complete the installation.Windows 951. At the Update Device Driver Wizard, click Next.2. Insert the driver

95. Click Yes, then click Exit.6. Restart Windows to complete the installation.To Verify Windows NT 4.0 Installation1. Click Start, Settings, Control