SIIG USB SoundWave 7.1 Pro User Manual

1USB SoundWave 7.1 ProQuick Installation GuideIntroductionThe USB SoundWave 7.1 Pro is a portable sound card thatbrings a home theater atmosphere to

10Windows XP / Server 2003 / 20001.For Windows XP / 2003: Click Start.For 2000: Click Start, then select Settings.2. Click Control Panel, double clic

11Technical Support and WarrantyQUESTIONS? SIIG’ s Online Support has answers! Simply visit our web site atwww.siig.com and click Support. Our onli

PRODUCT NAMEUSB SoundWave 7.1 ProFCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS BOPERATING ENVIRONMENT: FOR HOME OR OFFICE USEFCC COMPLIANCE STAT

2Requirements• Pentium® II-350 MHZ or equivalent PC• 128MB RAM and an available USB port• Windows® 8 (32-/64-bit) / 7 (32-/64-bit) / Vista(32-/64-bit)

3• USB Connector: Plugs into the system's USB port.• Microphone LED: When the Microphone/Line Inis muted, the light will turn on.• Volume (+, -

4• Optical audio connector & 3.5mm stereoconnector: Plug the 3.5mm stereo connector endto Audio Out, then plug your optical audiocable to the Opt

54. Select Yes, I want to restart my computer now, thenclick Finish to restart the computer.Windows XP (32-/64-bit) / Server 2003 (32-/64-bit) / 2000

6With Windows built-in driver: USB Audio Device orC-Media USB Headphone Set will be displayed.Xear 3D Audio Configuration UtilityThe USB PnP Sound Dev

7Speaker ConfigurationWindows 8 / 7 / Vista / Server 2008 & 2008 R2Make sure to log in as Administrator or an account withadministrative privilege

84. Select your speaker type from the drop down list.5. Click OK to save the settings.Microphone ConfigurationWindows 8 / 7 / Vista / Server 2008 &

9Note: Microphone Boost increases sensitivityby approximately 20dB. This setting is optionaland not be needed in most cases.Uninstalling the Soundcar